Wiwax
Product grade AppearanceVisual Penetration at 25 °C [0.1 mm]ASTM D 1321-16a Congealing point [°C]ASTM D 938-12 Drop point [°C]ASTM D 3954-15 Viscosity at 140 °C [cP]ISO 3219:2000 WIRATEN 90 prills or pastilles 16–30 90–98 102–115 <40 WIRATEN 95 prills or pastilles 11–15 90–98 102–116 <40 WIRATEN 100 prills or pastilles 7–11 94–100 102–117 <40 WIRATEN […]
Sabofog
Fogging refers to condensation of water vapor on the surface of a transparent plastic film (due to differences in temperature and humidity between the two sides of the film) in the form of small discrete droplets leading finally to loss of transparency. In food packaging films, fogging causes loss in content visibility, and therefore in […]
Sabostat
Most plastic materials tend to build up static charge due to very low conductivity (high surface resistivity). Consequences of static charge build up vary from the most severe scenario like sudden electrostatic discharge in a flammable/explosive atmosphere or damage to packaged electronic goods, to less catastrophic but still problematic cases such as electrostatic adhesion in […]
Sabostab
For over 25 years, Borealis has been a leading provider of polyolefins, base chemicals and fertilizers. In line with its mission to Keep Discovering, innovative solutions made possible by Borealis are driving the transformation to a more circular economy. UV Absorbers UV light stabilizers prevent degradation of polymers by scavenging free radicals formed when plastic […]
The Impact of Extended Producer Responsibility (EPR) on the UK Packaging Industry
Extended Producer Responsibility (EPR) represents one of the most significant regulatory shifts the UK packaging sector has seen in years. As brand owners and packaging producers prepare for its full rollout, understanding what EPR involves and what it will cost is essential. Watch our video below, featuring Joe Putt, Technical & Regulatory Affairs Specialist, and […]
Antimony Trioxide Export Restrictions: A Guide for Plastribution Customers
In September 2024, China’s export controls on antimony trioxide went into effect. This strategy, supporting domestic interests in sectors like defense and renewable energy, has began to impact industries here in the UK.
Impact of Tariffs on UK supply of Polyethylene
As the spectre of rising global trade tensions looms, the UK plastics industry is bracing for significant impacts in the coming months. The European Union is poised to introduce tariffs on a range of US imports starting in April and, unless there is a breakthrough in negotiations, a 25% tariff on imports of US polyethylene (PE) is expected from April 13th.
This development could lead to considerable disruption in supply as producers and traders grapple with the implications.
ExxonMobil Signature Polymers: A New Era of Collaboration
2025 will see ExxonMobil™ Polymers begin the process of positioning their products under a single brand. As part of this process, ExxonMobil™ will transition their grade names to better reflect the attributes and benefits they provide.
Reflections in lockdown
Mike Boswell, Managing Director of leading polymer distributor, Plastribution, provides an insight on a year like no other.
CHIMEI launches high heat resistant PC alloy for 5G product applications
With the advent of the 5G era, demand for higher product performance continues to increase, such as more flame retardant and heat resistant materials for communications applications.
In response to this increased demand, CHIMEI has developed PC 545, featuring truly high flame retardant and high heat resistant properties with great processability.
